A Smart Dustbin Robot is a simple DIY robotics project that automatically detects a person approaching and opens its lid without requiring physical contact. The robot can use an ultrasonic sensor to measure the distance between the dustbin and an approaching hand or person. When the detected distance becomes smaller than a preset value, a […]
Category: DIY Projects
Smart Door Alarm – DIY
Project Introduction The Smart Door Alarm is a simple DIY electronics project designed to detect when a door is opened and immediately provide an audible warning. It uses a door sensor or switch to monitor the door’s position and a buzzer to produce the alarm sound. When the door remains closed, the sensor stays in […]
ESP32 RGB LED Controller – DIY
Project Introduction ESP32 RGB LED Controller – DIY An ESP32 RGB LED Controller is a simple DIY electronics project that uses an ESP32 development board to control the color and brightness of an RGB LED. An RGB LED contains three basic color channels—red, green, and blue—which can be combined in different proportions to produce many […]
Bluetooth-Controlled Robot Car – DIY
Project Introduction A Bluetooth-Controlled Robot Car is a simple and exciting DIY robotics project that allows a small robot vehicle to be controlled wirelessly using a smartphone or another Bluetooth-enabled device. Instead of using a wired controller, the robot receives movement commands through a Bluetooth connection, making the project a practical introduction to wireless robotics. […]
Temperature & Humidity Monitor – DIY
Temperature & Humidity Monitor – DIY A DIY Temperature & Humidity Monitor is a simple electronics project that measures the temperature and moisture level in the surrounding air. An ESP32 or Arduino can be connected to a DHT11 or DHT22 sensor to collect environmental readings. The measured values can then be displayed on a small […]
Wi-Fi LED Controller
Project Introduction Wi-Fi LED Controller is a simple IoT project that uses an ESP32, LED, and resistor to control an LED wirelessly. The ESP32 connects to a Wi-Fi network and receives commands from a smartphone or computer through a simple web interface. When the user selects ON or OFF, the ESP32 changes the LED state […]
DIY Obstacle-Avoiding Robot
DIY Obstacle-Avoiding Robot | Robotics Engineering Courses Robotics Engineering Courses Learn robotics, automation, programming and engineering through practical projects. Home Robotics Engineering Robot Programming Robotics Projects DIY Obstacle-Avoiding Robot An obstacle-avoiding robot is a simple and exciting DIY robotics project that can move around a room while detecting and avoiding objects in its path. It […]